HDi Intercooler Specification

IC-X01-R

Approximate Weight (kg): 5.8KG

Used in (hp) : ~700

Size in mm (L x W x H) : 790 x 92 x 225mm

Core in  mm (L x W x H) : 565 x 92 x 208mm

Structure : HDi 14 rows  traverse   tube and fin

Out let : 3.0”

Finishing : HDi X01-R Seamless side tank polished

Pressure drop (psi) : 0.8

Flow rate CFM : >650

Approximate temperature drop Degree(C’) at 15 psi : 86-98

Recommendation : 

WRX, Forester , Starlet,

Ford BA/BF

1.5-4.0L turbo charged

IC-GT2-580

Approximate Weight (kg): 5.4KG

Used in (hp) : ~700

Size in mm (L x W x H) : 780 x80 x 290mm

Core in mm (L x W x H) : 580 x82 x 291mm

Structure : HDi 17 rows GT 2 traverse   tube and fin

Out let : 3.0”

Finishing : HDi GT2 Seamless side tank polished

Pressure drop (psi) : 0.2

Flow rate CFM : >700

Approximate temperature drop Degree(C’) at 15 psi : 82-95

Recommendation : 

1.8L-4.0L turbo charged

IC-GT2-440

Approximate Weight (kg): 6.5KG

Used in (hp) : ~750

Size in mm (L x W x H) : 660 x 80 x 440mm 

Core in mm(L x W x H) : 440 x 82 x 450mm

Structure : HDi 25 rows GT 2 traverse   tube and fin

Out let : 2.5” HDi CLAMP

Finishing : HDi GT2 Seamless side tank polished

Pressure drop (psi) : 0.2

Flow rate CFM : >900

Approximate temperature drop Degree(C’) at 15 psi : 77-98

Recommendation : 

Ford BA/BF/FG

1.8-4.0L turbo charged

IC-GT2-256

Approximate Weight (kg): 3.0KG

Used in (hp) : ~550

Size in mm (L x W x H) : 400 x80 x210mm

Core in mm (L x W x H) : 265x82 x208mm

Structure : HDi 12 rows GT 2 traverse   tube and fin

Out let : 55mm

Finishing : HDi GT2 Seamless side tank polished

Pressure drop (psi) : 0.2

Flow rate CFM : >400

Approximate temperature drop Degree(C’) at 15 psi : 82-95

Recommendation : 

Hiace 1KD 2KD engine in KDH 200

IC-GT2-679

Approximate Weight (kg): 6.0KG

Used in (hp) : ~700

Size in mm (L x W x H) : 885 x 70 x 260mm 

Core in mm(L x W x H) : 665 x 60 x 245.5mm

Structure : HDi 15 rows GT 2 traverse   tube and fin

Out let : 57mm

Finishing : HDi GT2 Seamless side tank polished

Pressure drop (psi) : 0.2

Flow rate CFM : >650

Approximate temperature drop Degree(C’) at 15 psi : 82-95

Recommendation : 

Ford Ranger / Mazda BT-50

Fake copy HDi Cooler

Genuine X01-R

HDi X01R intercooler is made with unique HDi GT2 Tube and fin core Technology, it only weight 6.2 kg which reduce the affect on the weight distribution geometry when mounted on far front of the car! It is high flow , high efficient and high quality product. with HDi Logo pressed on top and the bottom plate

Facke X01-R

Fake X01R intercooler are made from standard bar and plate core some weight over 11 kg!! With its weight density it is not only has great affect on handling but also tend to leakage between the bonding of bar and plates. And there is no HDi marking on top or bottom of the plate

HDi X01R are made of high quality T6061 material The surface finish is highly monitored

Fake X01R cooler kit are made with low grade recycle aluminum it is dull and easy to tell the differences

HDi X01R insist on quality and performance each are cooler are meticulously designed with performance enhancement and quality in mind , the cooler nuts are machine to perfect fit to our top plate

Fake HDi X01R are made with rough material With horrible welding attached to the top plate it prompt to break off over the period of time .

HDi X01R intercooler side tank are made from highest metal forming technology (please also check out www.fgpower.com) and then are welded with highly skilled welding technique fulfilling HDi highest welding requirement and leakage test

Fake HDi X01R is made of low grade recycle cast aluminum tank rough inside and outside as also well know by specialize of possible pin hole leakage during sand casting.       

​Due to the success of Hybrid /HDi X01R intercooler kit and Racing products, unfortunately there are poor quality imitations in the market. These imitators may use similar names, logo, or use Hybrid or HDi as keywords in search engine.Some of these unscrupulous merchants even copied HDi product images from our website and pasted these images onto their own web page for advertising. Some even tell their customers that they come from the same manufacturer as HDi, their only intention is to deceive customer who is looking for HDi original goods.As an established company since 1994, we have been Design, Test and manufacturing our own products and have been well known in producing the best value, best performance and reliable products for motor sport enthusiasts.